CommScope ERA
®
CAP M2 with Fiber Interface M0203AHA_uc
Page 2 © August 2022 CommScope, Inc.
Document Overview
Abbreviations Used in this Guide
Safely Working with ERA Hardware
The following sections provide important information that you should read and know before working with
any ERA hardware. Observe all cautions and warnings listed in this section.
Health and Safety Precautions
AP Access Point ISDE Innovation, Sciences et Développement économique Canada
AUX Auxiliary ISED Innovation, Science and Economic Development Canada
C Celsius kg Kilogram
CAN Central Area Node LED Light Emitting Diode
CAP L 2 Low Power Carrier Access Point, Second Generation LPS Limited Power Source
CAP M2 Medium Power Carrier Access Point, Second
Generation
MHz Megahertz
Cat Category mm Millimeter
CAT Copper Transport MMF Multi-Mode Fiber
dB Decibel N/A Not Applicable
dBm Decibel-milliwatts OPT Optical Transport
DC Direct Current PN Part Number
DCCS Distributed Coverage and Capacity Solutions RAN Regional-Area Network
RF Radio Frequency ION Intelligent Optical Network
EMC Electromagnetic Compatibility RU Rack Unit
EMEA Europe, Middle East, Africa SFP Small Form-Factor Pluggable
EU European Union SMF Single-Mode Fiber
F Fahrenheit TEN Transport Expansion Node
FCC Federal Communications Commission UAP Universal Access Point
Gb Gigabyte Vdc Volts, direct current
GHz Gigahertz W Watts
EFTA European Free Trade Association
A high leakage current ground (earth) connection to the Power Supply Unit (PSU) is essential before
making any other connections to the PSU.
Laser radiation. Risk of eye injury in operation. Do not stare into the laser beam; do not view the laser
beam directly or with optical instruments.