Need help?Do you have a question about the CommScope ERA CAP M2 and is the answer not in the manual?
General| Brand | CommScope |
|---|---|
| Model | ERA CAP M2 |
| Category | Wireless Access Point |
| Language | English |
Details changes made to the document across revisions.
Lists warnings, cautions, and notes used throughout the document.
Essential precautions for safe operation and installation of ERA hardware.
Glossary of acronyms and abbreviations used in the installation guide.
Important warnings to prevent damage to equipment during installation and operation.
General safety guidelines applicable to all installation procedures.
Procedures to prevent damage from Electro-Static Discharge (ESD).
Information regarding regulatory compliance and standards.
Explains compliance labels and symbols used on the equipment.
Specifies minimum distances required between antennas for compliance.
Identifies and describes the connectors and LED indicators on the CAP M2.
Lists available accessories and optional components for the CAP M2.
Details the available mounting kits for installing the CAP M2.
Information on SFP+ modules required for fiber connectivity.
Information about OCTIS Universal Lever Assembly Kits for fiber connections.
Step-by-step instructions for assembling OCTIS Universal Lever connectors.
Guidelines on the maximum number of CAP M2 units supported in an ERA system.
How to calculate the power consumption requirements for the CAP M2 unit.
Criteria and considerations for selecting an appropriate installation site for the CAP M2.
Provides the physical dimensions of the CAP M2 for site planning.
Details the weights associated with the CAP M2 for installation planning.
Lists the necessary tools and materials for installation.
Instructions for unpacking and inspecting the CAP M2 and its accessories.
Guidance on acquiring all necessary components for the installation.
General safety precautions to be observed during CAP M2 mounting.
Procedures for mounting the CAP M2 onto a wall.
Recommendations for orienting the CAP M2 when wall mounted.
Step-by-step guide for mounting the CAP M2 using a wall mounting kit.
Instructions for mounting the CAP M2 with an optional hybrid fiber splice box.
Preparatory steps before installing the hybrid fiber splice box kit.
How to assemble and wire the hybrid fiber splice box.
Detailed steps for wiring the hybrid fiber splice box.
Mounting the CAP M2 with the hybrid fiber splice box kit.
Procedure for grounding the CAP M2 if required by local codes.
Steps to connect the CAP M2 to a passive RF antenna.
Instructions for cleaning RF cable connectors to ensure proper performance.
Guide for connecting the optical fiber cable to the CAP M2.
Steps for installing SFP+ modules into the CAP M2.
Instructions for connecting the CAP M2 to a Classic CAN or TEN.
Details the AC power cable specifications and connections for the CAP M2.
Details the DC power cable specifications and connections for the CAP M2.
Steps for connecting the power supply to the CAP M2.
Procedures for connecting the AC or DC mains power to the CAP M2.
Explains how to power on the CAP M2 and its LED behavior.
How to connect the CAP M2 using a hybrid fiber splice box for power and fiber.
Information on how to contact CommScope's technical support team.
Provides telephone numbers for live support and assistance.
Information on accessing online support resources and submitting tickets.
Information on recycling arrangements for electrical and electronic equipment.
Details on accessing technical training for CommScope products.
Guidance on how to access user documentation for the ERA series.
To Next Page
