M0203AHA_uc CommScope ERA
®
CAP M2 with Fiber Interface
© August 2022 CommScope, Inc. Page 17
Mount the Fiber CAP M2
MOUNT THE FIBER CAP M2
A Fiber CAP M2 is suitable for indoor and outdoor installations.
Mounting instructions are divided into the sections listed below. Follow the mounting instructions that are
applicable to this installation:
• "Wall Mount a CAP M2” on page 18
– "Mounting Orientation for Wall Mounts” on page 18
– "Mounting CAP M2 with a Wall Mounting Kit” on page 19
– "Mounting a CAP M2 with a Hybrid Fiber Splice Box Kit (optional)” on page 22
General Mounting Cautions
The following cautions apply to all Fiber CAP M2 installations; there may be other mounting cautions
applicable to a specific mounting option, which will be defined in the applicable mounting procedure.
Attach all CAP M2 securely to a stationary object as described in this installation guide.
To maintain proper ventilation, keep at least 76 mm (3-inch) clearance around the CAP M2.
The installation site must be able to bear the weight of the CAP M2; see Table 10 on page 16.
To Next Page
Loading...
