CommScope ValuLine VHLP3 Series - Required Tools List; Tool Specifications and Sizes

TOOL REQUIRMENTS
Tools
Page 8 of 20
7706805
EQUIPMENT AND TOOLS
SECTION 3 INSTALLATION
INSTRUCTIONS
Tools Required
Thread Diameter in MM
M4 M8 M10
Ring and Open Spanner (A/F) 17mm
Torque Wrench
Sockets (A/F) 17mm
Allen Key (A/F) 3mm 6mm 8mm
Torx Head Driver (T-20)
Cutting Pliers
Compass
General Toolbox
Posidrive/Philips Driver (No2)