INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 260
INSTRUCTION MANUAL CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Using the Keyboard
The ICLI provides a rich set of keys to assist the user while working with the command line. The
functionality is divided into:
» Basic line editing
» Command history
» Context-sensitive help
» Long lines and pagination
Basic Line Editing
Basic line editing allows the input of characters to form a command line, while also allowing cursor
movement and insertion/deletion of characters and words. The following table shows the available
editing functions and keys.
Table 1 - Basic Line Editing Key
Key Operation
Left/Right Move one character left/right
Home/Ctrl-A Move to start of line
End/Ctrl-E Move to end of line
Del/Ctrl-D Delete character at cursor
Backspace/Ctrl-H Delete character to the left of cursor
Ctrl-N Delete the entire current line
Ctrl-U/Ctrl-X Delete all characters to the left of the cursor
Ctrl-K Delete all characters under the cursor and right
Ctrl-W Delete from cursor to start of word on the left
TAB Complete word at end-of-line
To Next Page
Loading...
