Compac CNG User Manual

Dispenser spare parts
Hydraulic Module Parts
Compac Industries Ltd.
Page 119
www.compacngv.com
Hydraulic Module Parts
Item
Part Number
Description
A
FC-COIL-0001
SCI-12-SS solenoid coil (Parker) With 3 metre lead
FC-COIL-0005
S2 -350 solenoid coil (Compac) with 3 metre lead
B
FC-VALVE-0035
S2-350 Complete 350 bar standard solenoid (Without Coil )
FC-VALVE-0036
S2-350 Complete 350 bar solenoid with O ring piston (Without Coil )
FC-VALVE-0037
S2-350 Complete 350 bar low temperature solenoid (Without Coil )
FC-SK-0001
Solenoid Seal Kit for all valves
FC-VALVE-PSTN-0001
Solenoid Piston - standard
FC-VALVE-PSTN-S2
Solenoid Piston (O ring style for high oil content gasses)
FC-SVK-0001
SCI-12-SS Solenoid Top Service Kit (275 bar models only)
FC-SVK-0003
S2-350 Solenoid Top Service Kit (350 bar standard)
FC-SVK-0004
S2-350 Solenoid Top Service Kit (350 bar low temperature)
FC-VALVE-0018
SCI-12-SS Complete 275 bar solenoid (Without Coil )
C
FC-FIL-0001
FCVCI-12-SS Grade 10 Coalescing Filter Element And Filter Bowl O-ring
FC-VALVE-0012
FCVCI-12-SS Complete Filter/Check Valve With Grade 10 Coalescing Filters
D
FC-SK-0005
FCVCI-12-SS Check Valve Seal Kit
E
FC-SK-0002
RCI-12-SS Regulator Valve Seal Kit
FC-VALVE-0015
RCI-12-SS Complete Regulator Valve
There are two different solenoid valves available, rated for either 275 or 350 bar pressure. Always quote
the serial number of your dispenser when ordering parts, check the part you receive matches the model number on the
valve label and never replace valves with a different type.

Compac CNG Specifications

General

Brand	Compac
Model	CNG
Category	Dispenser
Language	English