EasyManua.ls Logo

Compak CUBE TAMP - INSTALLATION; 7.1. LEGAL WARNINGS; 7.2. IMPORTANT WARNINGS

Compak CUBE TAMP
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
12
7. INSTALLATION
7.2. IMPORTANT WARNINGS
The operator must be a responsible
adult. Never a child nor someone without
the ability to accept that responsibility
When handling the machine, the following
precautions should be obeyed:
Feet must not be bare.
Hands and feet must be dry.
Do not get the machine wet.
Do not expose the machine to
direct sunlight or other atmospheric
agents.
Never insert any part of the body
between the tamp area and the
support
When unplugging the grinder,
always pull on the plug and never
the power cable to avoid a possible
short circuit.
7.1. LEGAL WARNINGS
The installer must read this instruction
manual carefully before installing the
machine
The installation of the device must be
carried out by qualied and
authorised personnel, in
compliance with the current
safety and hygiene standards.