Compak E8 OD - Technical Characteristics

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 07/01/2016 | K06307
4
5. TECHNICAL CHARACTERISTICS
5.1.Usage
The coffee grinders are intended for use on commercial premises and facilities where
ground coffee is required, or in small stores that sell coffee. The grinder must only be
used to grind coffee beans. Any use other than this will be considered improper and
dangerous.
NOTE: The manufacturer will not be held responsible for any damages resulting from
improper use of the equipment, or for not following the safety measures as outlined
below.
5.2.Technicaldata
Model
100V
50Hz
100V
60Hz
110V
60Hz
220V
60Hz
230V
50Hz
240V
50Hz
E5 OD
Electrical
power
655 550 570 (W)
Spin speed 1.650 1.370 1.390 rpm
E6 OD
Electrical
power
600 700 700 730 610 630 (W)
Spin speed 1,270 1,530 1,580 1,500 1,290 1,310 rpm
E8 OD
Electrical
power
750 810 860 735 730 840 (W)
Spin speed 1,250 1,540 1,600 1,600 1,325 1,330 rpm
E10 CONIC
OD
Electrical
power
890 960 825 825 800 850 (W)
Spin speed 335 388 400 375 325 331 rpm
E10 MASTER
CONIC OD
Electrical
power
850 1,000 935 930 950 975 (W)
Spin speed 326 378 325 388 340 345 rpm