Hardware Guide 4–1
4
Battery Packs
Charging a Battery Pack
To charge a battery pack, insert the battery in the battery
compartment and connect the computer to AC power. Leave the
computer plugged into the electrical outlet until the Battery
Charging light is green. This ensures that the battery is fully
charged.
Using a New Battery Pack
Charge the battery pack in the computer’s battery compartment
while connected to an external power source.
A new battery pack should be fully charged before it is used for
the first time. The battery pack will work without being fully
charged, but the battery gauge will not show an accurate charge
until the battery pack receives its first full charge.
To Next Page
Loading...
