External Device Connections
Hardware Guide 7–7
2. Plug the opposite end of the cable into a standard telephone
wall jack. Or, if applicable, plug the opposite end of the cable
into the phone plug adapter, which then plugs into the wall
jack. Some countries may require an adapter to connect the
modem to the telephone wall jack.
The NIC models will need an RJ-45 cable. To connect the cable:
1. Plug one end of the RJ-45 cable into the RJ-45 jack on the
computer.
2. Connect the other end of the cable into the network jack.
For information about configuring communication software or
drivers, refer to the Modem and Networking guide on the
Notebook Products Reference Library CD.
Using the Security Slot
The security slot on the computer allows you to physically secure
the computer. To use the security slot:
1. Insert the locking device into the security slot.
2. Turn the locking device clockwise 90 degrees.
To remove the device, turn the locking device counterclockwise
90 degrees and remove the device from the slot.
To Next Page
Loading...
