Battery Packs
Hardware Guide 4–3
4. To insert the battery pack, angle the battery pack into the
compartment with the battery contacts facing inward 1.
Press down on the battery pack until it is fully seated and the
battery release latch clicks 2.
Inserting the battery pack
5. Open the display.
6. Press the power button to resume operation.
Calibrating the Battery
If the battery gauge becomes inaccurate, you must recalibrate the
battery pack. Recalibrating the battery means recharging the
battery to its maximum capacity and resetting the battery gauge to
accurately display the level of charge.
1. Plug in the AC adapter.
a. Allow the battery pack to charge until the battery charge
light turns off, showing that the battery pack is fully
charged.
b. After the battery charge light or the icon turns off, unplug
the AC adapter.
To Next Page
Loading...
