Drives
Hardware Guide 5–3
4. Press the disc onto the tray spindle. Handle the disc by the
edges, not the flat surfaces.
Inserting the disc
5. Close the media tray.
The light on the drive turns on while the disc table of contents is
being read. The light turns off when the drive is ready to receive
commands.
Viewing the CD
When autorun is enabled, the CD contents will appear on the
screen.
If autorun is not enabled:
1. Click Start > Run, then type:
X:\program\autorun.exe
(where X = your CD drive designation)
2. Select the OK button.
To Next Page
Loading...
