8–8 Hardware Guide
Computer Upgrades and Add-Ons
5. To add a new modem or NIC board, insert the board into the
empty connector slot at a 45-degree angle 1. Then slide it
gently into place until it is seated while tilted.
✎
The modem or NIC board connectors are keyed (notched) to
ensure correct positioning.
6. Push the modem or NIC board down until the plastic
retention clips 2 snap into place.
7. Connect the internal modem/NIC cable 3 to the modem or
NIC.
Installing a modem or NIC
8. Replace the Mini PCI compartment cover and reinstall the
screws.
To Next Page
Loading...
