Reference Guide
2-13
Writer: Dianne Fielden Saved By: Troy Witte Saved Date: 07/24/97 4:42 PM
Pages: 28 Words: 6156 Template: c:\template\commercial\comm.dot
File Name Ch2.doc Part Number 308336-001
QuickLock/QuickBlank
QuickLock/QuickBlank disables the keyboard and mouse
interface, and can blank the screen, without exiting any
applications that are currently running.
Enabling QuickLock and QuickBlank
To enable the QuickLock and QuickBlank features, complete
the following steps:
1. Turn on the computer.
2. When the F10 Setup message appears in the lower-right
corner of the screen, press the F10 key.
✎
If you do not press the F10 key while the message is
displayed, you must turn the computer off, then on again
to access the utility.
3. Press the Enter key to bypass the welcome screens and
display the main menu.
4. Select Computer Setup from the main menu and press the
Enter key.
5. Select the Built-In Devices option.
6. Select the Security Management option.
7. Locate the QuickLock and QuickBlank items, in the
Power-On Password section, and select Enable QuickLock
of the Keyboard.
CAUTION:
To ensure the security of QuickLock/QuickBlank, you
must also disable the USB ports through Computer Setup to prevent
the use of USB input devices.
8. Select any other QuickLock/QuickBlank and USB port
preferences, then select OK to exit the Security
Management screen.
For more information about the various screen and
configuration options, refer to Chapter 5, “Using Compaq
Utilities.”
9. Select File, Save Changes and Exit from the menu bar near
the top of the screen.
To Next Page
Loading...
