2-14
Using Intelligent Manageability
Writer: Dianne Fielden Saved by: Troy Witte Saved date: 07/24/97 4:42 PM
Pages: 28 Words: 6156 Template: c:\template\commercial\comm.dot
File Name Ch2.doc Part Number 308336-001
Disabling the Keyboard and Mouse Interface
Once in an application, enter the QuickLock key combination
(Ctrl+Alt+L).
The keyboard and mouse (or other input device connected to the
mouse connector) is disabled. The application cannot be
accessed, but remains in view, unless the QuickBlank feature is
also enabled through the Computer Setup utility.
Enabling the Keyboard and Mouse Interface
To enable the keyboard and input device connected to the
mouse connector, enter the power-on password.
✎
For security reasons, the characters you type do not
appear on the screen. The application will not be affected
by the characters typed.
Configuration
Management
Configuration Management features include:
■
Remote ROM Flash
■
Remote Boot and Operating System Installation
■
Remote Security Management
■
Remote Wakeup
■
Remote Shutdown
■
Replicated Setup
■
Advanced Configuration and Power Interface (ACPI)–
ready hardware
■
Dual-state power button
■
Enhanced Support Software CD and World Wide Web
Site
✎
Use of remote Configuration Management features
requires an established setup password.
To Next Page
Loading...
