Compaq Deskpro 4000N - ISA Bus Overview

4-2 Upgrading the Desktop Computer
Writer: Dianne Fielden Saved by: Holly Jahangiri Saved date: 07/24/97 4:42 PM
Pages: 14 Words: 1776 Template: c:\template\commercial\comm.dot
File Name Ch4.doc Part Number 308336-001
Installing the
Computer
You can install the Compaq Deskpro 4000N Network Personal
Computer on, under, or beside your workspace. There are three
methods of installation: the self-mounting method, the bracket
mounting method, and the drawer install method.
✎
A mounting bracket is a Compaq-supplied option.
Self-Mounting Method
The self-mounting method requires removing the system board.
Compaq recommends that you contact your authorized Compaq
dealer or service provider when using this installation.
CAUTION:
Do not mount the computer upside down when using
this procedure.
Bracket Mounting Method
The computer may be mounted in a horizontal or vertical mode
using the mounting bracket available from Compaq. Refer to the
documentation included with the mounting bracket for complete
installation procedures.
CAUTION:
Make sure you use the correct fasteners to suit the
material to which the mounting bracket will be installed. Failure to
select the proper fasteners may result in damage to the computer.
CAUTION:
Do not mount the computer upside down when using
this procedure.