Hardware and Software Setup
Hardware Guide 1–5
5. Turn on the computer by sliding and momentarily holding,
then releasing, the power switch 1.
When power is turned on:
■ The power/suspend light 2 turns on.
■ The battery pack in the primary battery bay and the external
battery pack (if attached) begin to charge and the battery
light 3 turns on. The battery light:
❏ Remains on while the battery packs are charging.
❏ Turns off when the battery packs are fully charged.
■ You are prompted to begin software setup.
To Next Page
Loading...
Need help?
General