3–6 Hardware Guide
Keyboard and Pointing Devices
■ Windows 98 with MultiMonitor Disabled—Toggle Fn+F4
to switch the image among:
❏ Computer display
❏ External display
❏ Simultaneous display (computer and external displays)
The external monitor can be connected through the external
monitor connector or the composite video-out jack.
■ Windows 98 with MultiMonitor enabled—Press Fn+F4 to
turn off an external display connected to the external monitor
connector and disable MultiMonitor.
Adjust System Volume (Fn+F5)
Press Fn+F5 to display the system volume level slide bar. Click
and drag the slide bar upward to increase volume or downward to
decrease volume. You also can adjust the volume with the left and
right arrow keys.
To mute volume, press
Fn+F5+M. To restore volume, press Fn+F5,
then clear the Mute checkbox.
Initiate Quick Controls (Fn+F6)
Quick Controls security features disable the keyboard and
pointing device and clear the display.
Before you can use the Quick Controls, you must set a power-on
password and enable the Quick Control preferences. For
instructions, refer to the Compaq Utilities guide, "Security
Management" section, on this CD.
To initiate Quick Controls manually, press
Fn+F6. To exit Quick
Controls, enter your power-on password.
The
Fn+F6 hotkeys cannot be used on an external keyboard
connected through a USB connector on the computer or an
optional docking base.
To Next Page
Loading...
Need help?
General