Quick Setup & User’s Guide 5-1
chapter 5
Using the Legacy Module
The optional Legacy Module (standard on select models) provides connectors
for serial and parallel devices, PS/2 mouse, and PS/2 keyboard.
✎
Microsoft Windows 98 and Windows NT 4.0 will not run properly if the Legacy Module is not
installed or has been removed from the iPAQ Desktop Personal Computer. The Legacy Module is
optional on systems running Microsoft Windows 2000 Professional or Microsoft Windows
Millenium.
Connect the Legacy Module to the Legacy Module connector on the rear
panel, as shown.
If the iPAQ Desktop Security Bar is installed, you must uninstall it prior to
removing the Legacy Module. Refer to “Uninstalling the iPAQ Desktop
Security Bar” on page 3-1.
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM
To Next Page
Loading...
