User’s Guide 1-13
Writer: M. Silvetti Saved By: Marianne Silvetti Saved Date: 03/03/98 2:30 PM
Pages: 26 Words: 3913 Template: c:\msoffice\templates\normal.dot
File Name Ch1appa.doc Part Number 284986-002
User Modes
The video controller signal may occasionally call for a mode
that is not preset if:
■ You are not using a Compaq standard graphics adapter.
■ You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. User changes
can be made to any or all of these modes and saved in memory.
The monitor automatically stores the new setting, then
automatically recognizes the new mode just as it does a preset
mode. In addition to the 21 preset modes that can be changed
and stored, there are 15 user modes that can be entered and
stored.
To revert back to the factory default settings, select
Reset
from
the
Factory Reset
menu in the on-screen display, and the factory
default resolutions will replace the user changes made for the
operating original display mode.
To Next Page
Loading...
Need help?
General
