User’s Guide 1-7
Writer: M. Silvetti Saved By: Marianne Silvetti Saved Date: 03/03/98 2:30 PM
Pages: 26 Words: 3913 Template: c:\msoffice\templates\normal.dot
File Name Ch1appa.doc Part Number 284986-002
2. Connect the other end of the signal cable to the 15-pin
graphics connector on the back of your computer.
3. Connect the power cord as previously illustrated.
!
WARNING:
To reduce the risk of electric shock or damage to
your equipment, do not disable the power cord grounding feature.
This equipment is designed to be connected to a grounded
(earthed) power outlet that is easily accessible to the operator. The
grounding plug is an important safety feature.
CAUTION:
Be sure that the power outlet you plug your power cord
into is easily accessible and located as close to the monitor as
possible. When you need to disconnect power to the equipment, be
sure to unplug the power cord from the power outlet.
To Next Page
Loading...
