Country-Specific Requirements
Country Accredited
Agency
Country Accredited
Agency
Australia EANSW* Italy IMQ*
Austria OVE* Japan JIS***
Belgium CEBC* Norway NEMKO*
Canada CSA** Sweden SEMKO*
Denmark DEMKO* Switzerland SEV*
Finland SETI* United Kingdom BSI*
France UTE* United States UL**
Germany VDE*
ll ll
* The flexible cord must be <HAR> Type HO3VV-F, 3-conductor, 1.0 mm2 conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country where it will
be used.
** The flexible cord must be Type SJT-2 or equivalent, No. 18 AWG, 3-conductor. The
wall plug must be a two-pole grounding type with a NEMA 5-15P (15A, 125V) or NEMA
6-15P (15A, 250V) configuration.
*** The appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. Flexible cord must
be Type VCT or VCTF, 3-conductor, 0.75mm2 conductor size. The wall plug must be a
two-pole type with a Japanese Industrial Standard C8303 (15A, 125V) configuration.
http://www.compaq.com/athome/support/msgs/7400/pwrcrd.html (2 of 3) [1/8/2002 3:53:09 PM]
To Next Page
Loading...
