Compaq S920 User Manual

Compaq S920 Color Monitor User’s Guide 1
5/3/01
File: Safety.fm
Safety Precautions
Power Input
Refer to the section about “Connecting the Power Cord”.
■ Do not modify the three-prong grounding type monitor power
plug in any way.
Installation
■ Do not place the monitor on an unstable cart, stand, or shelf
where it may fall and injure personnel or damage equipment.
■ Route power cords so that they cannot be walked upon or
tripped over.
■ Do not allow anything to rest on the power cord.
■ Do not install the monitor where there is dampness, or where
it may be exposed to rain or water. Avoid spilling liquid of
any kind on the unit.
Ventilation
■ Do not block or cover ventilation openings on the back or
bottom of the monitor cabinet.
■ Do not place the monitor near a radiator or heating vent.
■ Do not push objects of any kind through cabinet openings.
This may result in fire or electric shock.

Compaq S920 Specifications

General

Screen Size	19” (48 cm) visual diagonal Viewable screen size 18” (46 cm) Anti-Glare Coating
Dot Pitch	0.26 mm (Diagonal) 0.22 mm (Horizontal)
Display Area Default	262 x 350 (mm) typical
Full Scan (H x W)	276 x 368 (mm), depends on signal timing
Display Colors	Infinite
Max. Resolution	1600 Dots x 1200 Lines
Compatibility	All graphic modes with horizontal frequencies between 30 KHz to 96 KHz
Synchronization Horizontal:	30 to 96 KHz
Synchronization Vertical:	50 to 160 Hz
Max Pixel Clock	202 MHz Max.
Input Signal	Video RGB Analog Sync. TTL Separate
Signal Cable	15-pin D-sub connector
Power Input Voltage Frequency	European Models: 200 to 240V AC Other Models: 100 to 240V AC 50-60 Hz
Current Rating	2.0 Amps
Power Consumption	120 W (Max.)

Weight and Dimensions

Dimension (W x H x D)	452 x 459 x 468 mm (approximate) 17.8” x 18.1” x 18.4”
Weight	20 kg Max. 44 lb Max.