Adjusting the Monitor
18 English
Adjusting the Monitor
The monitor display has several adjustable settings which may need
to be fine tuned occasionally. Adjust the monitor:
• When the monitor is installed for the first time.
• If the resolution (number of pixels on the display) or refresh rate
(vertical scan frequency rate) has been changed.
• If the graphic card has been changed.
• If the monitor is connected to a different computer.
• After using the Mode Recall function. See “To use Mode Recall” on
page 28.
NOTE: For best performance, it is recommended that you select a
video mode of 1280 x 1024 @ 60 Hz.
Using the monitor controls
There are five controls that perform the following operations:
Left browse/Brightness
Menu
Right browse/Contrast Select/Auto
On/Off
Status LED indicator
To Next Page
Loading...
Need help?
General
