English 1-5
Part Number: 155818-001 - Writer: JD Poteet - Saved by: Cary Dier Saved date: 09/15/99 1:03 PM - File Name:
155818001.doc
CAUTION: When using a signal cable with BNC connectors,
simultaneously press the Up
and Select adjustment buttons,
located on the front of the monitor, to select or change the video input.
2. Connect the other end of the signal cable to the 15-pin graphics
connector on the back of your computer.
3. Connect the power cord as previously illustrated.
!
WARNING: To reduce the risk of electric shock or damage to your
equipment:
n Do not disable the power cord grounding plug. The grounding plug
is an important safety feature.
n Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
n Disconnect power from the monitor by unplugging the power cord
from the electrical outlet.
n Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not
pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
If the screen image is distorted, reverse the BNC horizontal and
vertical connections.
To Next Page
Loading...
Need help?
General
