Compo Closet CUDDY - Setting up your CUDDY or CUDDY Lite; Step 1: Unpacking and Filter Check; Step 2: Removing the Solids Bin; Step 3: Adding Aggregate;Bag

● Press the carbon filter onto the circular fitting to secure it.
● Orientate the agitator legs downwards and replace the solids bin.
● Just in case - give CUDDY a good wipe down to remove any dirt or debris left over from the
manufacturing and shipping process… It’s your bum after all!
● Lower the seat and you’re good to, er… go!
Top Tip - Empty the solids bin when it is approximately 60% full to prevent it overflowing.
July 05, 2022 12