33
Compool Cp3400
Power Center
Equipment keys
Located at the equipment pad, the Power Center provides manual-override capability of your
equipment.
Caution
To prevent water damage, close Power Center door after use.
The Auto/Service key toggles the Power Center between the following
modes.
Auto
Control Panel and Spa-side Remote are enabled. Power Center keys are disabled.
Service
Power Center keys are enabled. Control Panel and Spa-side Remote are
disabled.
A blinking “Auto” status lamp indicates that the equipment is undergoing a 3-Hour program
override. See 3-hour Filter Override for details.
Caution
Manual-activation of equipment from the Power Center, will override any of the built-
in equipment interlocks and safety delay circuits.
To Next Page
Loading...