- 21 -
cooling mode, and these programs are preserved when
switching between the modes. Therefore, if the thermostat
is used for both heating and cooling, then there is no need
to modify the program of the thermostat every time a switch
between these modes is performed.
4.2 Recommendations for creating a heating program
The average comfort needs of a person can usually be satised by a
temperature of 19-21 °C during the night, and a temperature of 22-23
°C during the day. During that time of the day, when the family is at
work or school, only a lower temperature is needed. As heating up and
cooling down usually takes a long time, it is reasonable to set the start
time of the switches 0.5-1 hour before the desired time of the modied
temperature. The programmability of the thermostat provides a perfect
solution for this.
For an average working family, a program similar to the one
below is recommended:
4.3 Programming steps
a. Press the “SET” button to go to the main screen.
To Next Page
Loading...
