- 25 -
4.4 Using the „COPY” function (Copying the program of a
day to other days)
• First, press the “SET” button to go to the main screen. Then
press the “COPY” button for approximately 3 seconds to
ac ti vate the “COPY” function. The notice “ ” appearing in
place of the time characters and the ashing abbreviation
MON indicating Monday shows that conditions are ready
for copying a program.
• Select the day whose program you wish to copy to another
day or other days using the large and buttons
on the front panel of the device.
• Press the “COPY” button to copy the program of the
selected day. After this, the ashing of the abbreviation
indicating the day that has been copied stops and it will
be visible continuously hereafter.
• Select the day to which you wish to copy the program
of the day copied beforehand using the large and
buttons. The abbreviation of the active day is
ashing during this selection process.
To Next Page
Loading...
