- 26 -
• After selecting the abbreviation that indicates the day to
which you wish to copy the program, press the “COPY”
button to copy the program. Hereafter, the abbreviation
indicating the day to which the program was copied will be
visible continuously. Following this, you can select further
days using the large and buttons and copy the
program to those days too by pressing the “COPY” button.
• Finally, press the “SET” button to save the modications
(if no buttons are pressed for at least 15 seconds, the
modications will be automatically saved). Afterwards,
the device goes back to the main screen. If required, the
program of further days can be freely copied by repeating
the above steps.
ATTENTION! The “COPY” function is only available, if the
days of the week were programmed separately!
4.5 Modifying the program
• The previously set program can be modied any time by
repeating the steps of programming.
To Next Page
Loading...
