Installa tion l 3-11
Connecting Compressed Air for
Self-Loading (Optional)
When connecting the optional self-loading function of the MDCW Carousel
Plus dryer an 80 psi {5.5 bar} compressed air source is required.
To connect the compressed air source:
1 Install the 1/4 inch NPT adapter to the compressed air outlet found on
the left side of the the dryer. Seal adapter threads with nylon tape.
2 Attach compressed air hose to the 1/4 inch NPT adapter.
3
Installa tion
Air hose connection
To Next Page
Loading...
