Conair 200 User Manual

Carousel Plus Dryer
Models 150, 200, 300, and 400 with DC-1 Controls
Corporate Office: 412.312.6000 l Instant Access 24/7 (Parts and Service): 800.458.1960 l Parts and Service: 814.437.6861
USER GUIDE
UGD028-0107
www.conairnet.com
INTRODUCTION • Purpose of the User Guide • How the guide is organized • Your responsibilities as a user • ATTENTION:
Read this so no one gets hurt • How to use the lockout device • DESCRIPTION • What is the W Dryer? • Typical
applications • How it works • Specifications: W Dryer • INSTALLATION • Unpacking the boxes • Preparing for instal-
-lation • Mounting the dryer and hopper on a Processing Machine • Positioning the dryer on the floor; Mounting the hop-
per on the throat • Mounting the dryer on the floor stand; Hopper on the throat • Mounting the dryer and hopper on the
mobile floor stand • Connecting the main power • Checking for proper air flow • Connecting the air hoses • Connect-
ing water hoses • Connecting air hose adapters • Connecting the RTD probe • Connecting the setback RTD • Mounting
a loader on the hopper • OPERATION • How it works • The W dryer control panel • W dryer control functions • Control
Function Description • To start drying • To stop drying • Using the auto start timer

Conair 200 Specifications

General

Brand	Conair
Model	200
Category	Dryer
Language	English

Summary

Introduction

ATTENTION: Read this so no one gets hurt

Highlights critical safety information to prevent injury and equipment damage.

How to Use the Lockout Device

Provides step-by-step instructions for using the lockout device for safety.

Description

What is the Carousel Plus W Series Dryer?

Describes the function and technology of the Carousel Plus W Series Dryer.

How It Works

Explains the operational cycles (Process, Regeneration, Cooling) of the dryer.

Specifications: Carousel Plus W Series Dryers

Provides detailed technical specifications including dimensions, power, and performance data.

Installation

Preparing for Installation

Details prerequisites for dryer installation, including site preparation and utilities.

Connecting the Main Power

Provides steps for safely connecting the dryer to the main electrical power supply.

Checking for Proper Air Flow

Guides on verifying correct air flow direction and performance before connecting hoses.

Testing the Installation

Outlines steps to verify the correct installation and operation of the dryer system.

Operation

Carousel Plus W Series Dryer: Control Panel DC-1

Explains the components and functions of the DC-1 control panel.

Carousel Plus W Series Dryer Control Functions

Details the various settable and monitorable functions of the dryer's control system.

Control Function Descriptions

To Start Drying

Provides step-by-step instructions for starting the drying process with material in the hopper.

To Stop Drying

Setting the High Setpoint Limit

Using Dewpoint Control

Using the Setback Feature (Optional)

Maintenance

Preventative Maintenance Checklist

Checking the Dewpoint

Troubleshooting

Identifying Problems and Alarms

Explains how to interpret alarms and identify the root cause of operational issues.

Common Alarm Categories and Solutions

Summarizes common alarms by category with their potential causes and resolutions.

Key Repair Procedures

Details procedures for replacing common components like fuses, relays, sensors, and heaters.