Conair 200 - Installation

Installation l 3-1
Installation
Unpacking the boxes . . . . . . . . . . . . . . . . . 3-2
Preparing for installation . . . . . . . . . . . . . . 3-4
Positioning the dryer on the floor. . . . . . . . . 3-5
Removing the cable tie from the
desiccant wheel . . . . . . . . . . . . . . . . . 3-5
Connecting the main power. . . . . . . . . . . . . 3-6
Connecting the process RTD probe . . . . . . . . 3-7
Connecting the setback RTD probe (Optional). 3-7
Checking for proper air flow . . . . . . . . . . . . 3-8
Connecting the air hoses . . . . . . . . . . . . . 3-11
Connecting the dryer to the hopper . . . . . . 3-11
Connecting air hose adapters . . . . . . . . . . 3-12
Connecting the aftercooler . . . . . . . . . . . . 3-13
Mounting a loader on the hopper . . . . . . . . 3-14
Testing the installation . . . . . . . . . . . . . . . 3-14
SECTION
3
3
Installation