5-8 l Maintenance
Cleaning the Regeneration Filter
Clogged filters reduce air flow and dryer efficiency. Cleaning frequency depends
on how much material you process and how dusty or full of fines it is.
1 Push in on the sides to release
the tabs on the front cover.
Remove the cover.
2 Remove outer filter and clean it
with soapy water. Let the outer
filter air dry.
3 Loosen the hose clamp holding
the regeneration filter onto the
regeneration inlet and remove
the filter.
CAUTION: Hot surfaces.
Always protect yourself
from hot surfaces inside
and outside the dryer
and drying hopper.
To Next Page
Loading...
