Before Using Your Conbrov T16 Camera
3. Setting the date and time
Insert the microSD card into the card reader and connect the card reader
to your PC. After a few seconds the microSD card will be shown as a
removable disk.
Open the SETTIME.TXT file.
SETTIME
The following menu will be displayed:
SETTIME.TXT
file Edit Format View Help
2016-07-15, 23:59:59
yes
Modify date and time on the computer.
yyyy-mm-dd, hh:mm:ss
yes: loop recording on microSD
no: no loop recording
Time format:
File name
9
(2) Do not connect or remove the microSD during operation, this will
damage both card and camera.
(3) Do not force the microSD into the microSD slot, this will damage
both card and camera. It only goes in one way.
(4) Ensure that the microSD clicks into place when inserting it. To
remove the microSD, slightly pull it out from the slot.
To Next Page
Loading...