Conceptronic CM3PVR - Recording and Its Functions

Copyright
®
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 5 of 10
E. Checking the firmware version of the CM3PVR
1.1 Connect the CM3PVR to your TV and set the power switch on the backside of the CM3PVR to the ‘I’
position.
1.2 Turn the CM3PVR on (with the remote control).
1.3 When the CM3PVR is in the main menu, press ‘RECORD’ – ‘0’ – ‘0’ – ‘0’ (zero) on the remote
control.
The CM3PVR will show the Device Information screen where you can see the current firmware version of
the CM3PVR.
1.4 Press the ‘ENTER’ button on the remote control to return to the CM3PVR main menu.