Copyright
®
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 6 of 10
F. Release notes
CM3PVR Version 065:
Fixed:
•
••
• Fixed record issues:
o After record, when entering standby mode, the blue LED stays lighted and the device cannot be
turned on with the remote control.
o After record, the blue LED stays on while there is no image on the display. The CM3PVR cannot be
turned off.
o After record, the blue LED stays on and the HDD keeps spinning.
•
••
• The time will change when the device is turned off with the remote control.
Modified:
•
••
• Storage path on the HDD can now contain up to 10 subfolders.
Added:
• Add checksum support. When upgrading with this firmware, it is not possible anymore to load the
firmware of another device in the CM3PVR by accident.
CM3PVR Version 060:
Fixed:
•
••
• Internal clock issue.
•
••
• When selecting a HD MPG file the device freezes.
CM3PVR Version 056:
Modified:
• Playback resume option removed from "Tools" due to functionality changes.
When playback of an *.AVI file has been stopped, you will now get a question to resume playback at
the position it has been stopped or play from the beginning.
The resume function will not be available once the CM3PVR has been turned off.
• Slide show timer functionality changed and option added to "Tools" within the "Setup" menu.
You can now set a time delay for your slide show within the "Tools" option.
Press the timer button on the remote control during a slide show to switch between the
following delays: 1, 2, 5, 20, 30 and 60 seconds.
Fixed:
•
••
• Hickups during MP3 playback.
To Next Page
Loading...
