ENGLISH
28
10. Computer USB Connectivity
The unit can be connected to your computer to copy data (movies, music, pictures, records, etc.) from and
to the internal HDD.
Note:
In our example below, we are using a computer running Windows XP, but the unit can be used on
all computers with USB support and the capability of reading & writing FAT32 file systems.
Connect the unit to your computer
• Connect the delivered USB to Mini-USB cable to the backside of the unit and to a free USB port on your
computer.
• Turn the unit on with the main power switch on the backside of the unit. The unit will be recognized
and installed automatically and will be shown as an extra drive on your computer.
By default, the internal HDD of the unit will be initialized as an USB storage device.
Disconnect the unit from your computer
• Single-click the ‘Safe Removal’ icon on the system tray.
• Select ‘Stop USB Mass Storage Device’ when prompted.
• Wait for the message ‘Safe to remove Hardware’.
• Disconnect the USB cable.
To Next Page
Loading...
