24
En
SETTING LIGHT METERING MODE
You can choose the desired part of the image to use for measuring the brightness and determine the exposure.
Metering Mode Description
Spot Meters the light in the center area of the image. Use this mode when the subject is
backlit or surrounded by strong light.
Matrix(default) Metering the light in different zones. Use this mode when the lighting condition
is complex. The camera can adjust the settings to correct exposure for the main
subject by metering the position of the subject, the brightness, the direct light, and
the backlighting etc.
To change Light Metering mode:
1. When ( ) Metering is highlighted, press to enter its submenu.
2. Press or repeatedly until the desired setting is highlighted.
3. Press the OK button to select the Metering Mode.
4. Press the MENU button to return to the picture-taking mode.
SETTING AUTO FOCUS (AF) MODE
The camera provides two AF modes to perform the Auto Focus function.
AF Mode Description
Spot In this mode, the camera uses the center zone of the subject to perform auto
focusing. Use this mode when you want to focus only what you aim at.
Multi-Area (default) In this mode, the camera automatically determines which area (center,
upper-left, upper-right, lower-left, lower-right) is best to perform the auto
focusing function. Use this mode when the lighting condition is complex.
To set AF mode:
1. When AF mode is highlighted, press to enter its submenu.
2. Press or repeatedly until the desired setting is highlighted.
3. Press the OK button to select the AF Mode.
4. Press the MENU button to return to picture taking mode.
TAKING A PICTURE
To Next Page
Loading...
