51
En
INSTALLING DIRECTX 9– WINDOWS 2000
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows 2000 is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5 Select the language. Click [OK].
Step 6 The installation screen will appear, click on Install
Microsoft DirectX 9.0.
Step 7 The next screen will begin the DirectX setup.
Select “ I accept the agreement “ then click [Next >].
Step 8 Click [Next >].
Step 9 Click [Finish].
Your computer will automatically restart.
SOFTWARE INSTALLATION GUIDE
To Next Page
Loading...
