RECORDING A VIDEO CLIP WITH THE SELF-TIMER
1. In the ( ) Video Clip Mode, press button, and the Self-Timer icon ( ) will appear on the LCD.
2. Place the camera on a flat surface or mount it on a tripod.
3. Use the LCD to compose the picture, then press the Shutter button to activate the Self-Timer.
The Self -Timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds then starts recording.
4. Press the Shutter button again to stop recording. Otherwise, the camera will continue to record until the
memory limit is reached.
USING THE MAIN MENU IN VIDEO CLIP MODE
How to Use the Main Menu in Video Clip Mode:
1. Turn the camera on.
2. Set the mode switch to ( ) Video Clip mode.
3. Press the MENU button to display the main menu.
4. Press or until the desired option is highlighted.
5. Press to enter the submenu.
6. Press or in the submenu to toggle between the options.
7. Press the OK button to make a selection.
• All selections will be marked by a red check mark.
8. To return to the previous menu, press .
9. To exit the menu at any time, press the MENU button.