- 7 -
Operation Instr
uctions
1. WALL CONTROL (see drawing below for the following instructions)
Speed Control
Press HI, MED, or LOW button to start the fan.
Press REV button to reverse air flow direction.
Press Fan OFF to stop the fan.
Light Control
Press DOWN button to turn on the bottom
fan lights. Press and hold for dimming feature.
Press UP button to turn on the top
fan lights. Press and hold for dimming feature.
NO
TE: The Remote Control Transmitter comes with a bracket
that can be mounted in any convenient place you choose. Next to
a light switch in the same room as the ceiling fan is a good place.
Attach the bracket with the two screws provided.
A.The Remote Control Transmitter
Transmitter
Mounting Bracket
Mounting Screw
B. Remote Control
Light Button UP
Speed Control
Press HI, MED, or LOW button to start the fan.
Press FOR/REV button to desired direction.
Press OFF to stop the fan.
Light Control
-Press Light button down
to turn on the bottom fan lights.
Press and hold for dimming feature.
-Press Light button up to turn on the top fan lights.
2. REMOTE CONTROL (see drawing below for the following instructions)
Light Button DOWN
To Next Page
Loading...