4. Adjusting the seat to the child’s size / shortening the belts
0253-01
Remove the seat shell from the
base unit and lay the shell upside
down on a clean surface.
Release the elastic tapes on the
cover and pull the cover back a
little. Lever out the metal clasps
secured on the bottom of the
shell, and thread them through
the large side opening and the
small slot (see illustration).
Now press the metal clasps from
the outside into the recess.
Both sides must be adjusted
equally!
0045-05 0051-06
4.10 4.11
To Next Page
Loading...
