Need help?Do you have a question about the CONCORD ULTIMAX and is the answer not in the manual?
Prepare seat shell by adjusting rotary handle and releasing it from the base unit.
Insert base unit and reboard wedge, then secure car seat belt through guides and clip.
Ensure correct belt positioning and attach seat shell to base unit, confirming with green indicators.
Prepare seat shell by adjusting rotary handle and releasing it from the base unit.
Insert base unit and reboard wedge, then secure car seat belt through red guides and tension.
Tighten belts using ratchet, ensure straight positioning, and attach seat shell to base unit.
Locate central adjuster, release belts, open buckle, and place child in seat.
Tension harness by pulling central adjuster until child is securely strapped.
Adjust head support height for child and ensure correct shoulder belt positioning.
Adjust harness belt routing through slots and re-secure connecting pieces and back trim.
Learn how to shorten or lengthen harness belts if central adjuster is insufficient.
Open belt clip and release belt tensioner by pulling grey lever upwards.
Keep grey lever pressed and pull seat belt to unwind from ratchet shaft.
Undo belt buckle, release elastic tapes, and lever out metal clasps to remove cover.
Locate and remove pelvic insert if child's body weight exceeds 8 kg.
Instructions for removing and washing seat covers, noting potential fading and avoiding solvents.
Observe airbag use, child items, belt positioning, and explain safety to children.
Covers accessories, original covers, belt routing, airbags, and post-accident procedures.
Details warranty commencement, period, exclusions (alterations, misuse, accidents), and claims process.
Information on universal classification, ECE Regulation 44, and vehicle seat compatibility.
Guidance on providing specific details when ordering spare parts or accessories.
Prepare seat shell by adjusting rotary handle and releasing it from the base unit.
Insert base unit and reboard wedge, then secure car seat belt through guides and clip.
Ensure correct belt positioning and attach seat shell to base unit, confirming with green indicators.
Prepare seat shell by adjusting rotary handle and releasing it from the base unit.
Insert base unit and reboard wedge, then secure car seat belt through red guides and tension.
Tighten belts using ratchet, ensure straight positioning, and attach seat shell to base unit.
Locate central adjuster, release belts, open buckle, and place child in seat.
Tension harness by pulling central adjuster until child is securely strapped.
Adjust head support height for child and ensure correct shoulder belt positioning.
Adjust harness belt routing through slots and re-secure connecting pieces and back trim.
Learn how to shorten or lengthen harness belts if central adjuster is insufficient.
Open belt clip and release belt tensioner by pulling grey lever upwards.
Keep grey lever pressed and pull seat belt to unwind from ratchet shaft.
Undo belt buckle, release elastic tapes, and lever out metal clasps to remove cover.
Locate and remove pelvic insert if child's body weight exceeds 8 kg.
Instructions for removing and washing seat covers, noting potential fading and avoiding solvents.
Observe airbag use, child items, belt positioning, and explain safety to children.
Covers accessories, original covers, belt routing, airbags, and post-accident procedures.
Details warranty commencement, period, exclusions (alterations, misuse, accidents), and claims process.
Information on universal classification, ECE Regulation 44, and vehicle seat compatibility.
Guidance on providing specific details when ordering spare parts or accessories.
General| Adjustable Headrest | Yes |
|---|---|
| Side Impact Protection | Yes |
| Removable Cover | Yes |
| Installation | Vehicle Seat Belt |
| Harness | 5-point |
| Weight | 6.6 kg |
To Next Page