0256-01
6. Removing the cover / removing the pelvic insert
Keep pressing the grey lever on
the belt tensioner down and pull
the car seat belt in the direction
of the arrow to unwind it from the
ratchet shaft.
Continue removing the seat in
the reverse order to its
installation.
To remove the cover, the seat
shell must be removed from
the base unit.
Undo the seat belt buckle.
Release the elastic tapes located
on the back of the cover at the
points marked in red in the
illustration.
0071-060086-06
6.15.3
To Next Page
Loading...
