3736
_ ADJUSTING THE SEAT ANGLE
_ USING THE SAFETY BAR
The CONCORD WANDERER’s safety
bar (05) is pushed into its matching
socket on the seat unit (04) and then
locked into place.
The safety bar can be removed when
putting your child in and when taking
him/her out. To do so, press the
release buttons (07) located to the left
and right on the inside of the seat unit
and pull the safety bar up to remove it.
_ ADJUSTING THE HANDLEBAR
The handlebar (02) can be set to an individual position that is comfortable
for you. To do so, press the release buttons (03) to the left and right of the
handlebar (02) and move the handlebar into the position you want (so that it
locks into place).
_ ADJUSTING THE FOOTREST
The footrest (09) can be locked into a range of different positions. To do so,
press the adjustment knobs (08) to the left and right of the seat unit and
move the footrest (09) into the position you want (so that it locks into place).
WARNING!
• Never permit your child to stand up on the footrest.
• The legrest positions passed vertical are only to be used for storage.
The tilt angle of the backrest can be adjusted steplessly with the help of the
adjustment straps (16) on the back of the CONCORD WANDERER.
Pull the upper
adjustment strap (16) to
tilt the backrest up.
Pull the lower adjustment
strap (16) to tilt the
backrest down.
To Next Page
Loading...
