4140
Start by threading out the cover from the Keder rail
on the footrest, through the aperture provided on
the inside on the left.
Subsequently, pull the cover upwards through the
central aperture of the tube frame in the area of the
head and out of the Keder rail.
Before washing:
Open the strap lock and pull out the crotch strap
from the plastic eyelets on the harness lock.
It is not necessary to remove the shoulder straps.
Remove the back plate from the closable bag on
the rear of the cover.
The tube frames and plastic parts of the CONCORD WANDERER can be
wiped using a moist cloth.
• The cover material colour may run slightly
when wet, in particular during washing.
• Do not use solvents on the cover!
The covering parts can be washed in a washing machine.
Leave the cover to dry completely after washing.
_ FITTING, REMOVING AND CLEANING THE
STROLLER COVER
The individual parts of the cover of the
CONCORD WANDERER are connected
together and secured to the tube frame
using press studs and Velcro fasteners.
First, release all of these connections.
To remove and install the cover, move the
footrest to the fully top/rear position!
_ USING THE RAIN COVER
To use the rain cover, pull the cover
down from top to bottom over the
seat frame.
The rain cover must always be
correctly spanned and ensures
sufficient circulation of air for your
child.
Please ensure the rain cover is
completely dry before replacing the
cover in the storage bag!
To Next Page
Loading...
