Concox GT06F - GPS Data Upload Distance Interval Command; Delayed Defense Setting Command; Vibration Alarm Setting Command; Displacement Alarm Setting Command

16
RESET#
Device restart 20 seconds after receiving
this command
Restart
DISTANCE,D#
D=0、50～10000 meter；
Distance interval；default value：300,
unit：meter；
10
GPS data upload
distance interval
DEFENSE,A#
A:1～60 minutes，set delayed defense，
default value：10 minutes
11
Delayed defense
setting
1.
2.
SENALM,ON#
SENALM,OFF#
12
Vibration alarm
(default OFF)
1.
R=100～1000; Displacement radius，
unit: meter
E.g. MOVING,ON,200,#
2.
MOVING,ON,R,#
MOVING,OFF#
13
Displacement alarm
setting
(default OFF)
RELAY,A#
A=0/1
0= restore petrol; 1=cut off petrol
Default value：0
E.g. RELAY,1#
15
Power/oil control
Set center number :
Delete center number:
CENTER,A,mobile number#
CENTER,D#
14
Set center number
DOOR,A#
A=0/1; 0 negative triggering，
1 positive triggering；
default: 0
17
Car door negative/
positive triggering
setting
Upload analog data:
T: upload interval; scope: 5∼ 3600(second)
Turn off analog upload: ；
default: OFF
ADT,ON,T#
ADT,OFF#
18
Analog upload
setting
FIND#
19
Find car by
triggering light
and buzzer