Nortec SAM-e Installation | 48
Header Installation
1 Install header insulation for Nortec SAM-e; expand header insulation to fit over header and slide
on. Ensure that edges tuck underneath synthetic grommets on top of header. Secure insulation
in place using metal straps. See Step 2.
2 Install header insulation for Nortec SAM-e Dual Inlet; expand insulation to fit over header and
slide on. Additionally, expand smaller metal cover for inlet leg and slide on. If inlet leg insulation
conflicts with inlet adapter, trim insulation to fit. Secure both covers in place with metal
strapping. See Step 3.
3 Install header insulation for Nortec Mini SAM-e; expand header insulation to fit over header and
slide on. Take care when installing to avoid permanently bending insulation. Inspect for a tight
fit after installation. See Step 4.
To Next Page
Loading...
