RotaRy laseR
13
user manual
EN
CONDTROL Auto RotoLaser
Manual mode
This mode allows construction of laser planes at any angle inclination.
Place the product on a solid and flat surface. Turn on the product.
Power indicator turns on.
Laser beam is blinking while self-levelling. As soon as self-levelling
is finished rotary head starts rotating clockwise at 600 rpm. Press
button on the product or button on remote control. Manual
mode is activated, manual mode indicator becomes red. Install the
product at required angle and fix its position.
To exit from manual mode and return to automatic mode press
button on the product or on remote control. Manual mode
indicator will turn off.
Top plumb dot
The product allows working with top plumb dot. It is on in any
operation mode of the product.
Rotation speed
Use remote control to run this function.
Speed 600 rpm is default. Press button to switch between
speeds of rotary head. Rotation speeds change in the following way:
600-0-120-300-600 rpm.
Attention! The slower rotation speed, the brighter laser beam.
To Next Page
Loading...
